Extron Intros a New Series of Distribution Amplifiers for DTP Systems

Extron just launched four new DTP twisted pair distribution amplifiers: two DTP HD DA 230 models and two DTP HD DA 330 models. These distribution amplifiers provide one HDMI input with loop-through, and either four or eight DTP outputs. Each twisted pair output sends HDMI, audio and control over shielded CATx cable to Extron DTP‑enabled products. The DTP HD DA 230 models extend these signals up to 230 feet (70 meters), while DTP HD DA 330 models extend signals up to 330 feet (100 meters). All models also accept analog stereo audio signals for simultaneous transmission over the same shielded CATx cable. They support computer video up to 2560×1600, HDTV 1080p/60 Deep Color, and 4K resolutions. The DTP HD DA offers bidirectional RS232 and IR pass-through at each DTP output, plus system level RS-232 device control via Ethernet insertion. It features remote powering of DTP receivers, EDID Minder, Key Minder, selectable output muting and compatibility with HDBaseT-enabled devices.

The DTP HD DA offers several features targeted at integrators including an HDMI input loop-through for local monitor support or system expansion, and the ability to independently mute each twisted pair output. It also features automatic input equalization which conditions incoming HDMI signals to compensate for signal loss over long input cables. Automatic color bit depth management based on the display EDID prevents color compatibility conflicts between the source and display. To speed-up installation, the DTP HD DA can send power to each of the four or eight DTP receivers over the shielded twisted pair cable. It offers convenient options for remote control, including Ethernet, USB, and RS-232 for easy integration into a variety of environments. Configuration of the DTP HD DA is made simple with Extron’s PCS (Product Configuration Software), which allows for expedited setup and EDID management.

The DTP HD DA can be integrated with Extron switchers, scalers or other DTP-enabled products to provide multiple, simultaneous outputs for signage and presentation overflow room applications. For additional integration convenience, each twisted pair output can be configured for compatibility with HDBaseT-enabled displays to send digital video and embedded audio, plus bidirectional RS-232 and IR signals over shielded CATx cable.

Here are all the details.